3 Inch Toilet Flush System Parts With Chrome Plated Front Tank
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||550g +/-3%|
|Fill valve installation height:||Adjustable from 220mm to 328mm (8.5"-13")|
|Flush valve installation height:||Fixed height (depends on height of overflow pipe)|
|Inlet size:||G3/8" brass|
|Outlet size:||3" for 2-pc toilet|
|Working pressure:||0.02Mpa-1.6Mpa (2.9 psi - 232 psi)|
|Float adjustment range:||no less than 70mm|
|Noise level:||<=40 DB|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Seal washer:||NBR rubber, flat|
|Tank lever:||Front mounted|
- WRAS approved toilet fill valve.
- Meet requirements of low pressure and high pressure.
- Adjustable working water level.
- Silent refilling, lower than 40 DB.
- Speedy refilling flow (4.5L/min).
- Natural rubber flapper, leakage free.
- Adjustable overflow every 5mm.
- Easy to operate flush handle.
- 100% inspection before shipment.
3 inch toilet flush system J0501+P0802B is a complete set of toilet
repair kits for 3 inch chain toilet. The inlet valve height could
be adjusted from 8.5” to 13”, which is workable for almost every
toilet in the market. The operation water pressure range is
0.02Mpa-1.6Mpa, which is normally enough for both low and high
pressure requirements. The 3 inch flapper flush valve is fitted
with rubber flapper which is endurable and easy to replace. The
front mounted handle is available in many different styles.